3248 Epoxy Glassfiber Laminated Sheet
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with epoxy resin as binder.It has high mechanical strength under high temperature,with good electrical stability under high humidity.The thermostability is grade F,suitable for all kinds of motor, electric appliances,electronic and other fields.
1.Good electrical stability under high humidity;
2.High mechanical strength under high
temperature,the mechanical strength
retention rate≥50% under 155℃;
5.Temperature resistance:Grade F
Compliance With Standards
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates - Part 4: epoxy resin hard laminates.
Appearance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Suitable for all kinds of motor, electric appliances,electronic and other fields.
Main Performance Index
|2||Water absorption Rate||%||≤0.5|
|3||Vertical bending strength||Normal||Lengthway||MPa||≥360|
|4||Impact strength (charpy type)||gap||Lengthway||KJ/m²||≥37|
|5||Parrallel shearing strength||MPa||≥30|
|7||Vertical electric strength
（in oil of 90℃±2℃）
|8||Parallel breakdown voltage(1 min in oil of 90℃±2℃）||KV||≥40|
|9||Dielectric dissiption factor（50Hz)||-||≤0.04|
|10||Parrallel Insulation Resistance||Normal||Ω||≥1.0×1012|
|After soaking for 24hours||≥1.0×1010|