Factory making China Fiberglass Reinforced Plastic Sheet Laminated
We constantly think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as living for Factory making China Fiberglass Reinforced Plastic Sheet Laminated, Honesty is our principle, skilled procedure is our perform, service is our target, and customers’ satisfaction is our long term!
We constantly think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as living for China Energy Saving Sheet, Electrical Polyimide Sheet, Customer satisfaction is our goal. We’re looking forward to cooperating with you and providing our best services in your case. We warmly welcome you to contact us and remember to feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specifications or inquiries today.
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with high Tg epoxy resin as binder.It has high mechanical strength under high temperature,with good electrical stability under high humidity.The thermostability is grade F,suitable for all kinds of motor, electric appliances,electronic and other fields.
Features
1.Good electrical stability under high humidity;
2.High mechanical strength under high temperature,
the mechanical strength retention rate≥50% under 180℃;
3.Moisture resistance;
4.Heat resistance;
5.Temperature resistance:Grade H
Main Performance Index
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for all kinds of motor, electric appliances,electronic and other fields.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE | |||
| 1 | Density | g/cm³ | 1.8-2.0 | |||
| 2 | Water absorption Rate | % | ≤0.5 | |||
| 3 | Vertical bending strength | Normal | Lengthway | MPa | ≥450 | |
| Horizontal | ≥380 | |||||
| 180±5℃ | Lengthway | ≥250 | ||||
| Horizontal | ≥190 | |||||
| 4 | Impact strength (charpy type) | No gap | Lengthway | KJ/m² | ≥180 | |
| Horizontal | ≥137 | |||||
| 5 | Compression strength | Lengthway | MPa | ≥500 | ||
| Horizontal | ≥250 | |||||
| 6 | Tensile strength | Lengthway | MPa | ≥320 | ||
| Horizontal | ≥300 | |||||
| 7 | Vertical electric strength （in oil of 90℃±2℃） |
1mm | KV/mm | ≥17.0 | ||
| 2mm | ≥14.9 | |||||
| 3mm | ≥13.8 | |||||
| 8 | Parallel breakdown voltage(1 min in oil of 90℃±2℃） | KV | ≥40 | |||
| 9 | Dielectric dissiption factor（50Hz) | - | ≤0.04 | |||
| 10 | Parrallel Insulation Resistance | Normal | Ω | ≥1.0×1012 | ||
| After soaking for 24hours | ≥1.0×1010 | |||||
We constantly think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as living for Factory making China Fiberglass Reinforced Plastic Sheet Laminated, Honesty is our principle, skilled procedure is our perform, service is our target, and customers’ satisfaction is our long term!
Factory making China Energy Saving Sheet, Electrical Polyimide Sheet, Customer satisfaction is our goal. We’re looking forward to cooperating with you and providing our best services in your case. We warmly welcome you to contact us and remember to feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specifications or inquiries today.
