Anti-Static Epoxy Glassfiber Laminated Sheet

Short Description:

  • Thickness: 0.3mm-80mm
  • Dimension: 1020*1220mm 1020*2020mm 1220*2040mm
  • Color: Black
  • Customization: Processing based on Drawings
  • Product Detail

    Product Tags

    Product Description

    This product is a laminated product made from non-alkali glass cloth dipped in epoxy resin by hot pressing. It has anti-static (anti-static) characteristics and good mechanical processing performance. The anti-static plate can be divided into three types: full anti-static plate, single-sided anti-static plate and double-sided anti-static plate.Suitable for electronic and electrical industries.


    1.Anti-static properties;
    2.Good mechanical properties;
    3.Moisture resistance;
    4.Heat resistance;
    5.Temperature resistance:Grade B


    Compliance With Standards

    Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.


    Appy to electronic,electrical and other industries,can be used as anti-static hollow plate for current isolation and service for various test smelter manufacturers, ICT test smelter manufacturers, ATE vacuum smelter manufacturers, functional smelter manufacturers and various electronic and motherboard manufacturers.

    Main Performance Index

    1 Density g/cm³ 1.8-2.0
    2 Water absorption Rate % <0.5
    3 Vertical bending strength MPa ≥350
    4 Vertical compression strength MPa ≥350
    5 Parallel impact strength (charpy type-gap) KJ/m² ≥33
    6 Tensile strength MPa ≥240
    7 Surface Insulation Resistance 1.0×106~1.0×109

  • Previous:
  • Next:

  • Related Products