Special Design for 4 By 8 Fiberglass Sheets - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing
Special Design for 4 By 8 Fiberglass Sheets - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with high Tg epoxy resin as binder.It has high mechanical strength under high temperature,with good electrical stability under high humidity.The thermostability is grade F,suitable for all kinds of motor, electric appliances,electronic and other fields.
Features
1.Good electrical stability under high humidity;
2.High mechanical strength under high temperature,
the mechanical strength retention rate≥50% under 180℃;
3.Moisture resistance;
4.Heat resistance;
5.Temperature resistance:Grade H
Main Performance Index
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for all kinds of motor, electric appliances,electronic and other fields.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE | |||
| 1 | Density | g/cm³ | 1.8-2.0 | |||
| 2 | Water absorption Rate | % | ≤0.5 | |||
| 3 | Vertical bending strength | Normal | Lengthway | MPa | ≥450 | |
| Horizontal | ≥380 | |||||
| 180±5℃ | Lengthway | ≥250 | ||||
| Horizontal | ≥190 | |||||
| 4 | Impact strength (charpy type) | No gap | Lengthway | KJ/m² | ≥180 | |
| Horizontal | ≥137 | |||||
| 5 | Compression strength | Lengthway | MPa | ≥500 | ||
| Horizontal | ≥250 | |||||
| 6 | Tensile strength | Lengthway | MPa | ≥320 | ||
| Horizontal | ≥300 | |||||
| 7 | Vertical electric strength （in oil of 90℃±2℃） |
1mm | KV/mm | ≥17.0 | ||
| 2mm | ≥14.9 | |||||
| 3mm | ≥13.8 | |||||
| 8 | Parallel breakdown voltage(1 min in oil of 90℃±2℃） | KV | ≥40 | |||
| 9 | Dielectric dissiption factor（50Hz) | - | ≤0.04 | |||
| 10 | Parrallel Insulation Resistance | Normal | Ω | ≥1.0×1012 | ||
| After soaking for 24hours | ≥1.0×1010 | |||||
Product detail pictures:
Related Product Guide:
The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Special Design for 4 By 8 Fiberglass Sheets - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Nairobi, Liberia, Cyprus, If any product meed your demand, please feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality products, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
By Hilary from Norwegian - 2017.03.08 14:45
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Abigail from Yemen - 2017.07.28 15:46
