High Quality for G10 Fiberglass Sheet - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing

Short Description:

Product Detail

Product Tags

Feedback (2)

Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for 6mm Fibreglass Sheet , 5mm Fiberglass Sheet , 5mm Fiberglass Sheet , We warmly welcome small business companions from all walks of lifestyle, hope to establish friendly and cooperative business make contact with with you and attain a win-win objective.

High Quality for G10 Fiberglass Sheet - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing Detail:

Product Description

This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with modified diphenyl ether resin as binder.It has high mechanical strength under high temeprature,good dielectric stability under high humidity.Good radiation resistanceit ,suitable for class H motor,electrical equipment as the insulation structure parts.

Features

1.High mechanical strength under high temperature;
2.Good electrical stability under high moisture;
3.High heat resistance;
4.High moisture resistance;
5.Good machinability;
6.Good radiation resistance
7.Temperature resistance:Grade H,180℃

Compliance With Standards

In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.

Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.

Application

Suitable for class H motor,electrical equipment as the insulation structure parts.

Main Performance Index

NO.	ITEM		UNIT	INDEX VALUE
01	Density		g/cm³	≥1.75
02	Water absorption		%	<0.5
03	Vertical bending strength	Normal	MPa	≥340
		180±2℃		≥170
05	Parallel impact strength（Charpy type）		KJ/m²	≥33
06	Tensile strength		MPa	≥294
07	Vertical electric strength（in oil of 90℃±2℃）	1mm	MV/m	≥20
		2mm
				≥18
		3mm
				≥16
08	Parallel breakdown voltage（in oil of 90℃±2℃）		KV	≥22
09	Relative dielectric constant（50Hz)		-	≤5.5
10	Dielectric dissipation factor（50Hz)		-	≤0.04
11	Surface insulation resistance	Normal	Ω	≥1.0×10¹³
		After soaking for 24 hours		≥1.0×10¹⁰
12	Volume resistivity	Normal	Ω	≥1.0×10¹¹
				≥1.0×10⁹
		After soaking for 24 hours
		180±2℃
				≥1.0×10⁸

Product detail pictures:

Related Product Guide:

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for High Quality for G10 Fiberglass Sheet - 3255 Modified Diphenyl Ether Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Guyana, Ukraine, Houston, In order to make more people know our products and to enlarge our market, we have devoted a lot of attention to technical innovations and improvement, as well as replacement of equipment. Last but not the least, we also pay more attention to training our managerial personnel, technicians and workers in planned way.

10mm Fiberglass Sheet