Factory wholesale Fiberglass Reinforced Plastic Board - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing
Factory wholesale Fiberglass Reinforced Plastic Board - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with high Tg epoxy resin as binder.It has high mechanical strength under high temperature,with good electrical stability under high humidity.The thermostability is grade F,suitable for all kinds of motor, electric appliances,electronic and other fields.
Features
1.Good electrical stability under high humidity;
2.High mechanical strength under high temperature,
the mechanical strength retention rate≥50% under 180℃;
3.Moisture resistance;
4.Heat resistance;
5.Temperature resistance:Grade H
Main Performance Index
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for all kinds of motor, electric appliances,electronic and other fields.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE | |||
| 1 | Density | g/cm³ | 1.8-2.0 | |||
| 2 | Water absorption Rate | % | ≤0.5 | |||
| 3 | Vertical bending strength | Normal | Lengthway | MPa | ≥450 | |
| Horizontal | ≥380 | |||||
| 180±5℃ | Lengthway | ≥250 | ||||
| Horizontal | ≥190 | |||||
| 4 | Impact strength (charpy type) | No gap | Lengthway | KJ/m² | ≥180 | |
| Horizontal | ≥137 | |||||
| 5 | Compression strength | Lengthway | MPa | ≥500 | ||
| Horizontal | ≥250 | |||||
| 6 | Tensile strength | Lengthway | MPa | ≥320 | ||
| Horizontal | ≥300 | |||||
| 7 | Vertical electric strength （in oil of 90℃±2℃） |
1mm | KV/mm | ≥17.0 | ||
| 2mm | ≥14.9 | |||||
| 3mm | ≥13.8 | |||||
| 8 | Parallel breakdown voltage(1 min in oil of 90℃±2℃） | KV | ≥40 | |||
| 9 | Dielectric dissiption factor（50Hz) | - | ≤0.04 | |||
| 10 | Parrallel Insulation Resistance | Normal | Ω | ≥1.0×1012 | ||
| After soaking for 24hours | ≥1.0×1010 | |||||
Product detail pictures:
Related Product Guide:
We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Factory wholesale Fiberglass Reinforced Plastic Board - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Kuala Lumpur, Paraguay, Angola, We have more than 100 works in the plant, and we also have a 15 guys work team to service our customers for before and after sales. Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!
By Annie from Doha - 2017.03.07 13:42
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Lena from Singapore - 2017.06.19 13:51
