Factory source Fiberglass Board Sheets - Anti-Static Epoxy Glassfiber Laminated Sheet – Xinxing
Factory source Fiberglass Board Sheets - Anti-Static Epoxy Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminating sheet made of electrician used alkali free glassfiber cloth impregnated with special epoxy resin by hot pressing,it has anti-static properties and good machinability.Anti-static board is divided into full anti-static board, single-sided anti-static board, double-sided anti-static board three types.
Features
1.Anti-static properties;
2.Good machinability;
3.Volumn resistance:106~109Ω
4.Temperature resistance:Grade F,155℃
Compliance With Standards
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Appy to electronic,electrical and other industries,can be used as anti-static hollow plate for current isolation and service for various test smelter manufacturers, ICT test smelter manufacturers, ATE vacuum smelter manufacturers, functional smelter manufacturers and various electronic and motherboard manufacturers.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE |
| 01 | Density | g/cm³ | 1.8-2.0 |
| 02 | Water absorption | % | <0.5 |
| 03 | Vertical bending strength | MPa | ≥350 |
| 04 | Vertical compression strength | MPa | ≥350 |
| 05 | Parallel impact strength（Charpy type） | KJ/m² | ≥33 |
| 06 | Tensile strength | MPa | ≥240 |
| 07 | Insulation resistance | Ω | 1.0×106~1.0×109 |
Product detail pictures:
Related Product Guide:
We have now a specialist, efficiency staff to provide good quality company for our consumer. We normally follow the tenet of customer-oriented, details-focused for Factory source Fiberglass Board Sheets - Anti-Static Epoxy Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Muscat, Munich, Georgia, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By April from Dubai - 2018.06.19 10:42
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Elizabeth from New Orleans - 2018.12.10 19:03
