Factory Cheap Hot Fr4 1.6 Mm - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing
Factory Cheap Hot Fr4 1.6 Mm - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing Detail:
Product Description
This product is a laminated product which made with the chemical treatment electrical purposed alkali-free glass cloth as the backing material,by hot pressing with high Tg epoxy resin as binder.It has high mechanical strength under high temperature,with good electrical stability under high humidity.The thermostability is grade F,suitable for all kinds of motor, electric appliances,electronic and other fields.
Features
1.Good electrical stability under high humidity;
2.High mechanical strength under high temperature,
the mechanical strength retention rate≥50% under 180℃;
3.Moisture resistance;
4.Heat resistance;
5.Temperature resistance:Grade H
Main Performance Index
In accordance with GB/T 1303.4-2009 electrical thermosetting resin industrial hard laminates – Part 4: epoxy resin hard laminates.
Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.
Application
Suitable for all kinds of motor, electric appliances,electronic and other fields.
Main Performance Index
| NO. | ITEM | UNIT | INDEX VALUE | |||
| 1 | Density | g/cm³ | 1.8-2.0 | |||
| 2 | Water absorption Rate | % | ≤0.5 | |||
| 3 | Vertical bending strength | Normal | Lengthway | MPa | ≥450 | |
| Horizontal | ≥380 | |||||
| 180±5℃ | Lengthway | ≥250 | ||||
| Horizontal | ≥190 | |||||
| 4 | Impact strength (charpy type) | No gap | Lengthway | KJ/m² | ≥180 | |
| Horizontal | ≥137 | |||||
| 5 | Compression strength | Lengthway | MPa | ≥500 | ||
| Horizontal | ≥250 | |||||
| 6 | Tensile strength | Lengthway | MPa | ≥320 | ||
| Horizontal | ≥300 | |||||
| 7 | Vertical electric strength （in oil of 90℃±2℃） |
1mm | KV/mm | ≥17.0 | ||
| 2mm | ≥14.9 | |||||
| 3mm | ≥13.8 | |||||
| 8 | Parallel breakdown voltage(1 min in oil of 90℃±2℃） | KV | ≥40 | |||
| 9 | Dielectric dissiption factor（50Hz) | - | ≤0.04 | |||
| 10 | Parrallel Insulation Resistance | Normal | Ω | ≥1.0×1012 | ||
| After soaking for 24hours | ≥1.0×1010 | |||||
Product detail pictures:
Related Product Guide:
Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Factory Cheap Hot Fr4 1.6 Mm - 3250 Epoxy Glassfiber Laminated Sheet – Xinxing, The product will supply to all over the world, such as: Orlando, Kuwait, Bulgaria, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By Emily from Canada - 2018.08.12 12:27
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Ruby from Austria - 2018.02.12 14:52
